Therm Products 5.5KW 240V Spa Heater A2550-5350ET Arctic Spas

5.5KW, 240V L-shaped replacement spa heater A2550-5350ET for Arctic Spas with 2-Inch Tee with 48" long cord and MJJ Plug (mini plug). This 11.6" long spa heater is now made by Hydro Quip replacing the old Therm Products A2550-5350ET and is ideal for use in hot tub spas.

This stainless steel L shaped flow through heater features 2" tee with cord MJJ plug (5 pin mini plug).

Heater Assembly, Arctic Spas, 90°, 5.5kW, 230V, 2" x 11.61" Long, w/48" Power Cord, w/5 Pin Mini J&J. Part number remains the same because of familiarity with the Therm part number even though Therm Products/Thermocore is now no longer in business. The good news is that Hydroquip is in business, so the replacement compatible Hydroquip model of this heater is covered under factory warranty.

This 5.5kw 240 volt heater type is used in Arctic Spas. The heater manifold is just under 12 inches long with L-shaped, 90 degree design and 2" housing size.

This is a dual voltage heaters, so is 1.375kW at 115 volts and 5.5kW at 230 volts.  12x2", 230v,5.5kW Therm Products heater for Arctic Spas.

Heater inlet and outlet size is 2 inch female buttress thread.

Note: Pressure switch is not included.  We also offer the curved version of this heater if needed.

48-9121-75K Replaces A2550-5300ET - Also replaces models A2550-5300, A2550-5350ET.

Stainless steel replacement flow thru, L shaped heater assembly with 48" cord, 5 pin mini plug, and a 5.5kW/230v element.

Heater Assembly, Arctic Spas, 90°, 5.5kW, 230V, 2" x 11.61" Long, w/48" Power Cord, 3 Wire connection

Heater Assembly, Flo-Thru, Arctic, L Shape, 5.5kW, 240V, 12" x 2" (Includes heater split nuts and cord)