Dynasty Spa Lights

JJ Electronics 2 Led Orange Blue LSL-SPR-A2-2-O This is a 2 LED spyder light. The colors of the lights are orange and blue. Designed for use in Dynasty Spas.  

Light socket cable adapter 9920-400489. This is a light socket with 8' cable to MTA-156 for Gecko IN.YE Series. Authentic Gecko spa part also replaces Dynasty Spa 10573 or DYN10573. Light cable compatible with Y-Series and M-Class control systems by...

37171 Light Bulb Tiger River. This is the 7 watt light bulb for early model Tiger Rivers spas before 2001 model year. Used in Watkins/Hot Spring/Tiger River hot tubs in the 1990s.   Installation may involve powering down spa, removing screws...

Waterway 5 Inch Light Reflector Back Cap 611-4110 This footwell light back cap is for a 5 inch light. Designed for use in Dynasty Spas. Replaces     15111    611-4110

Standard Spa Light Bulb LTSBLBULB is a 12 Watt, 12 Amp replacement bulb. This is a standard white bulb used in many different brands of hot tubs. Replacing the standard spa light bulb requires access to the rear of the light fixture, under the spa...

Topside Control Panel Light Bulb 10226 by Balboa.  If the light goes out in the control panel, the panel light bulb may need to be replaced. To replace a control panel bulb, first shut power off. According to Balboa, the procedure is: With the...

Spa light wiring harness with 2 pin connector for hot tub lighting 633-1000. Uses a single bulb. This Waterway main spa light harness for 12v bulbs has a 2 pin connector to plug into spa pack. Need bulbs? See 912. We also offer Gecko bulbs 246AA0064...

Spa light wiring harness and reflector 813-4360 by Waterway.  Main LED or standard light wiring harness with light socket-Belight and 2 wires. Uses a single bulb. This Waterway main spa light harness for 12v bulbs also replaces 57-315-1040 , ...

LED light Spyder series with 6 LED Yellow 2013  Led light cable for Dynasty Spas Led, Spyder, 6 Led, Yellow, 2013

LED light Spyder series with 6 LED Green 2013  

Coast Spa Pin Light Lens 633-3028-SI SGMS Sunburst Clear SGMS 1” Pin Light Assembly, Sunburst Style in clear houses the LED lights.   Note, in order to install new LED light lenses, your installer will need a 3 1/4" drill bit for the part...

Light Lens 633-7168LG Threaded Optical BX-200 Coast Spas.  

Spa Light Main Coast 630-6008G Front Access.  Face diameter is just under 3 1/4", 2-5/8" hole size. Comes with  gasket, nut, lens and light back (plastic). Light bulb and cord not included.   Need a cord? See 813-4360. Need a bulb? See...

LENS-3 Coast Spa mini light lens with mounting nut. Clear lens is 1 inch in diameter in the front and 1 1/4 inches long. 3/8" threads, 5/8" wide nut. This is a 2 part set of a clear light lens and mounting nut.  

Waterway Plastics Wall fitting w/red & blue lenses. 3-3/4" hole size, 5" face diameter. We also offer the smaller 3 inch light fixture. This kit 630-K005 comes with the 5 inch light assembly and the colored lenses.  Assembly includes lens,...

Waterway Plastics Front access light wall fitting assembly 630-6005. Shipped with red and blue lens set and a free mounting wrench.  Comes with gasket, nut, lens and light back (plastic). Light cord not included. Wall Fitting, Front Access2-5/8"...

Waterway Plastics spa light Wall fitting 630-5005 wit reflector. Shipped with red and blue lens set, wall fitting. Requires 2 5/8 inch hole size and has a 3 1/4 inch diameter face. Spa light complete with 2 color lenses (red and blue) that snap over the...