Gecko IN.YJ-3 Spa Control System 0612-300012

Gecko IN.YJ-3 Spa Control system kit with remote heater 0612-300012 includes the in.k336 control panel.  Also includes the In.Touch3 wifi module.

Features:
Operates one 2-speed pump, or two 1-speed pumps (alternate topside needed to operate 2 pumps NOT INCLUDED)
Solid-state water flow detection: No pressure switch to adjust
IPX5 rated waterproof design
Preloaded configuration allows fast and easy installation
in.touch 3 WiFi module included
in.k336 topside included
Each output voltage can be configured to 115v or 230v
Standard 2" 4kW heater, 15" length
Can control a circulation pump (optional)

Note: 2-Speed pumps use two outputs, therefore, pump 1 must be 1-speed in order to operate a circ pump, blower or pump as the second output.

Note: This pack will operate two 1-speed pumps by programming to the proper configuration.
The remote heater has a 48" cord to attach it to the control box.

In order for this Control System to become Wi-Fi Capable, you must use it with the Wi-Fi module 0608-521047 that is included with this kit.

The in.yj's size makes it easy to install in your small footprint spa, without losing out on functionality and options. Like all Y Series packs, the in.yj is compatible with in.k series keypads, in.touch 2 and in.touch 3. Please refer to the Tech Book or Flyer in the documentation tab for more detailed information.

Please be aware, this control is shipped set up to run 230v appliances. A conversion will need to be made if using 115v appliances. SCAN THE QR CODE ON THE OUTSIDE ON THE CONTROL BOX FOR TECHNICAL DOCUMENTS THAT MATCH THE REVISION OF YOUR CONTROL SYSTEM.