Gecko IN.YJ-3 V3 Control System IN.K300 Control Panel 0612-300011

Gecko IN.YJ-3 V3 Control System IN.K300 Control Panel 0612-300011.

The in.yj's size makes it easy to install in your small footprint spa, without losing out on functionality and options. Like all Y Series packs, the in.yj is compatible with in.k series keypads, in.touch 2 and in.touch 3. Please refer to the Tech Book or Flyer in the documentation tab for more detailed information.
Please be aware, this control is shipped set up to run 230v appliances. A conversion will need to be made if using 115v appliances. SCAN THE QR CODE ON THE OUTSIDE ON THE CONTROL BOX FOR TECHNICAL DOCUMENTS THAT MATCH THE REVISION OF YOUR CONTROL SYSTEM.

    Features:
    Operates one 2-speed pump, or two 1-speed pumps (alternate topside needed to operate 2 pumps NOT INCLUDED)
    Solid-state water flow detection: No pressure switch to adjust
    IPX5 rated waterproof design
    Preloaded configuration allows fast and easy installation
    in.touch 3 WiFi module included
    in.k300 topside included
    Each output voltage can be configured to 115v or 230v
    Standard 2" 4kW heater, 15" length
    Can control a circulation pump (optional) 

Box Dimensions
Length     Depth     Height
12"     3-3/4"     7-3/8"

This Control System is WiFi Compatible, please see Tech Tips for information. 

Note: 2-Speed pumps use two outputs, therefore, pump 1 must be 1-speed in order to operate a circ pump, blower or pump as the second output.

Note: This pack will operate two 1-speed pumps by programming to the proper configuration.

The remote heater has a 48" cord to attach it to the control box.

In order for this Control System to become Wi-Fi Capable, you must use it with the Wi-Fi module 0608-521047. Please see Recommended Items for quick and easy access to this part.