null Your SEO optimized title

Pump Wet End 4HP 56 frame QCA CMP 27203-300-000

Write a Review
SKU:
27203-300-000
MPN:
27203-300-000
Availability:
27203-300-000
Shipping:
Calculated at Checkout
  • wet end 27203-300-000 CMP
  • Spa pump wet end 27203-300-000 CMP QCA XP2
Now: $89.77
RRP: $128.99

Description

CMP spa productsWet end 27203-300-000 3hp-4hp used on 3hp and 4hp - 48 or 56 frame side discharge spa pumps.

This CMP wet end assembly is used in 3-4 HP QCA Spa pumps and fits many pump model types including Aquaflo XP2 model.

3HP Wet End 48Y/56Y frame 2 inch plumbing in and out.

27203-300-000 wet end

This complete CMP wet end assembly 27203-300-000 includes matched impeller and seal.  Connects to 2 inch plumbing.

This pump wet end is designed to fit 56 frame pumps, but also fits 48 frame pumps.  This wet end can be mounted to Aqua Flo XP2 pump motors as well as some of the Vico Ultima Plus and Waterway pumps including Executive, EX2 and Super-Flo.

In/Out connectors are 2" standard threads to hook up to your existing 2 inch spa plumbing connectors (2 inch pump unions).  Actual thread diameter measured across is slightly over 3 inches, but the connection is called a 2" connection.  Comes with drain plugs installed

Measurements: 8" tall by 7 1/2" wide  by 5 1/2" deep.

27203-300-000-wet end

Specs:  3HP impeller (for pumps rated 3HP or 4HP), 48Y or 56Y (fits both 48 and 56 frame pumps), side discharge (instead of center discharge - means the discharge sits on the side instead of straight in the middle), 2 inch plumbing connections threaded.
Although a 3HP impeller is used in these pumps, it can deliver the flow equivalent of a 4HP pump to the plumbing systems designed by QCA Spas and other hot tub manufacturers.  This is the factory original replacement wet end for QCA Spas 4HP pump.

This Custom Molded Products pump wet end comes with 2 sets of mounting holes, so don't worry if you are not sure if your pump is 48 frame or 56 frame, this wet end will work with both frame sizes!

Need 2" pump unions or pump orings? We've got those too!

This CMP model Q 27203-300-000 is the original QCA Spa pump wet end.

Pump Model CMP Pump
Motor Frame 48 Frame Thru-Bolt, 56 Frame Thru-Bolt
Drain Plug Location 4,6,9 o`clock
Suction Style Center
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 3.0hp
Volute Fastening Type 8 Screws

 Wet end includes all components inside the wet end including seal 27203-000-990 and impeller 27203-300-300.

 

Save

Save

Save

Save

View AllClose

Warranty Information

Original QCA Factory 90 Day Warranty
View AllClose

1 Review

  • 5
    Pump Wet End 4HP 56 frame QCA CMP 27203-300-000

    Posted by Unknown on 2nd May 2017

    Checked out a lot of website and this was the best thing. I was looking for a 6 hp and couldn't find one it was rated as a 4hp installed it and is twice the power of the 6hp I replace it with.Very happy customer...

View AllClose