4.5kW Heater 230V 15 Inch HydroQuip C2450-0307ET

DISCONTINUED   see  27-J0425-6S-K

Flow Through 230 volt spa heater rated at 4.5kW.  Includes the 4.5kW heating element and the heater unions.

Now shipping new replacement model to replace this discontinued heater - still 4.5kW, 230 v  15" x 2" for 2 inch inner diameter plumbing.

Note that the pressure switch is not included.

FREE SHIPPING!

Used in Baja Sportub controls.

Stainless steel 2-1/4" x 15" with 4.5kW 230 volt heating element, 1/8"npt pressure switch tap, dual groove thermal well cover (2) 10-32 x 3/8" mounting stud, (2) studs for self resetting hi limit.

We also offer heater tailpieces if needed.

Need a pressure switch? Use 3029 which works with this heater,  or there is also 510AD0167 .

Flow through straight heater is 15 inches long with connections for your 2 inch spa plumbing.  The pressure tap orientation is 0 degrees (inline) with the heater terminals.  The voltage can be 115/220v. At 220v, this is a 4 1/2 kw heater used in Baja spas and other hot tubs.

At 115v, this becomes a 1.1kW heater.

Mounting lugs measure 9-1/8" on center. Hydro-Quip 5/97- Recent

Need heater gaskets?  See the 711-4030 2-inch heater gaskets.