Gecko IN.YE-5 Control System IN.K450 Control Panel AMP Cords 0610-300003

Gecko IN.YE-5 Control System IN.K450 Control Panel AMP Cords 0610-300003.

This IN.YE-5 comes bundled with the IN.K450 topside panel and AMP cords.  Free shipping.

This Spa Pack and Control Panel Bundle 0610-300003 includes:

Built in Heater Probes
Programmable via Keypad
Self Diagnostic and Solid State Water Flow Detection
WiFi Ready- in.touch module (Sold Separately)

Bundle Includes:
0610-221046-355 Control: IN.YE-5 latest version spa pack controller

BDLK4503OP Current Model Topside Bundle with Overlay IN.K450: In.K450

95100519 (x2) - Dual Speed Amp Cord (x2)

95100517 (x2) - Single Speed Amp Cords (x2)

MFG #9920-400489 Light Socket with 8' long cable, MTA-156 3-PIN

9917-102123 Adapter Plate for this IN.K450 control panel retrofit

Gecko IN.YE-5 Spa Pack IN.K450 Control Panel and AMP Cords 0610-300003 Control System Bundle

Operates:
Convertible Pack 120V/240V
Heater: 1.0kW/4.0kW
Pump 1: 1 or 2 Speed 120/240V
Pump 2: 1 or 2 Speed 120/240V
Blower/Pump3: 1 Speed 120/240V
Circulation Pump: 120/240V (see below)
Light: 12V
Ozonator: 120/240V (see below)

Note: If using both Circ and Ozone, must be in same voltage and will need AMP Splitter Harness
(Sold Separately) #9920-401369

Control panel (included  IN.K450) has 7 buttons.

• On/Off Key
• Pump 1/Off Key (low/high if dual speed pump/off)
• Pump 2 Key
• Blower Key
• Light Key
• Up/Down Keys

Menu is accessed via either program key or light key depending on the keypad configuration.

This system 0610-300003 can replace LX-15 control systems as used in Diamante, Dynasty and other hot tub models and brands.

We also offer this system with the smaller control panel in.k200- see  0610-300004 as needed.