HydroQuip 5.5kW Heater 48-PS55-S with Pressure Switch Box and Cords

Hydroquip heater 2.25" x 15"  (heater 48-PS55-S ships as current model and connects to 2 inch plumbing) comes with box, sensor mount, 24 inch cords and pressure switch.

Heater, FloThru, HQ PS Elec, 230v, 5.5kW, with Short Cord, Slide 48-PS55-S

HydroQuip Platinum Series, 5.5kw 115v/230v flow through type heater. The heater tube measures 15" x 2" and comes complete with a 24" long cord and pressure switch.

15 inch heater with 2 inch housing diameter for connection to 2 inch spa plumbing.

Pressure switch tap orientation is 0 degrees from heater terminal (so inline)  1.375kW/5.5kW heater depending on supply voltage.

• 230v heater is 5.5 kW.
• 2 cords are 24 inches long (2 plugs)

Free shipping within the continental USA!

HydroQuip 5.5kW Heater with Pressure Switch Box and Cords. For use exclusively with the HydroQuip Platinum series electronically switched control systems featuring slide heater technology.

VersaHeat heaters are used in Baja spas and by other hot tub manufacturers.

If you just need the heater tube without the box and cords, see 26-0072-15-K .

We also offer a complete heater cord kit 30-1005E.

Receptacles are also available if needed, see WS-OVO4-02 or 09-0041A .

Platinum Series, 5.5kw 115v/230v flo-thru heater. The tube measures 15" x 2" and comes complete with a 24" cord and pressure switch

48-PS55-S replaces 22-87B-S00-1FP3 , 48-PS55-S , 9296-11 and also replaces  22-873-040-0543 , 22-873-050-0543 , 22-87B-S00-1FP3 , 26-87B-S00-1FP3 , 48-HS45 , 48-HS55 , 48-PS40 , 48-PS40-S , 48-PS45 , 48-PS55 , 9296-11.