Hydroquip S-Class Gecko SSPA Heater with Pressure Switch 4kW 26-0800-5S-KP

This Hydroquip 4.0kW heater 26-0800-5S-KPS includes the pressure switch, tailpieces, gaskets and also includes 2 jumper straps/wires.

This heater replaces the Therm heater C2400-C3464-1 and the LA Spa EL-63007M heater that is no longer available.

Also includes a 5-position Ground strip.

4kw gecko spa heater is 2 Inches X 15 Inches.

Gecko SClass Replacement, 15"x2-1/4", 230v, 4.0kW, Gen2

Gecko S-Spa 4kw, 240v replacement heater.

2.25"x15", 4.0kW, Gecko, S Class type heater assembly.

Pressure switch included is the current compatible model and is included in this kit.  For pressure switch mounting instructions, see below.

2 connecting jumper strap wires are included for easy connection to circuit board.

We also offer a ground bus bar if needed, though a grounding bar is included with the heater- NA-30

Bonding wire for grounding the heater 9219-010  though most heaters will already be grounded if they were originally installed correctly.

Replaces Gecko heater 9920-100338 and includes the pressure switch and wire.

Also replaces:

•    2-00-7505
•    9920100338
•    GK9920100338
•    HEAT:WAV:SC-4.0-KW-240-2-INC
•    HEAT.WAV SC-4KW-240-2-INC2PSI
•    C2400-0800ET
•    C2400-0800ET-G
•    B24040GM
•    20-00284
•    20-00285
•    11528
•    DYN11528.
•    11528
•    9920-100338

 Pressure Switch Mounting Instructions

Use 2-3 wraps of teflon tape in a clock-wise direction.

Remove the plug or any debris from the pre-threaded mounting hole in the heater housing.

Carefully and slowly begin threading the pressure switch into the hole assuring the switch is going in straight and not cross-threaded.

Continue threading the switch into the heater until lightly snug and terminals are aligned as desired.  Approx. 3-4 threads will be left showing.

Need extra gaskets (2 included with this heater kit) , see 60-21619