Marquis Spa Circuit Board 2005 MTS MRQ600-6289

Marquis Spa Circuit board. MQ2KUR1A. Balboa 53579 for select model Marquis Spas.

This Circuit Board Was Used Partially In Spas Up to 2006.

You Will Need to measure the Mounting Holes at Bottom Of The Board- put a tape measure across bottom from left to right. The First Mounting Hole Is Located at 1/4 Inch, The Second Hole at 4 1/2 Inches, and the Third Hole at 10 Inches. If Your Mounting Holes are not at these locations, please See Circuit Board Number 600-6292.

These Boards look Identical and in fact function the same, But The Mounting Holes are Different.

Please Call Us with Any Questions.

This Circuit Board Is Typically Mounted in A Metal Control Box.

Please note: Circuit Boards are non-returnable items as they cannot be resold to another spa owner as new. On the bright side, you will also know that the board you receive is pristine, factory new and has never been installed before. See our return policy for further details. Circuit boards ARE COVERED under original MANUFACTURER'S WARRANTY.

Contact us if you need assistance in determining the correct board for your spa control system.

Chip MQ2KUR1A