Dynasty In.Clear 200 Salt System 15570

Gecko In.Clear Bromine Salt System 15570 as used in Dynasty Spas.

Bromine based sanitizing system for hot tubs with low maintenance  - once installed, the in.clear generates the proper amount of bromine for your spa eliminating the guesswork.

Includes a communication cable to connect to Gecko Y and X series.
Product can still work in "stand alone mode" if communication cable is not connected.
Voltage: 240 V
Cord length: 8'
Cord type: AMP as used with Dynasty Spas.

IN.CLEAR 200, AMP cord with 1.5 PSI pressure switch.

· One of the most efficient water sanitation systems in the industry
· Programmable Low Level settings
· 2 operating modes
· Low maintenance! Easy to handle
· Eliminates the need to add extra chemicals to destroy pollutants
· Does not produce any offensive odors & reduces eye irritation

• Dimensions: (W x H x D) 10.875’’ x 6.046’’ x 4.682’’
(276.2 mm x 153.6 mm x 119 mm)

Electrical specifications:
• Input rating: 230-240 V nominal (+ 5/- 10 %)
• Frequency: 50/60 Hz nominal (+ 1. 5 / -1.0 Hz)
• Operating current: 0.09 A (90 mA)

In.clear flow rate:
• A minimum of 3 GPM (11.4 l/min)
• A maximum of 40 GPM (151 l/min)

Need a keypad? See .k200 keypad 0605-300001 with overlay.

We also offer  Bromicharge bottles 3.5 lbs ea. see 0699-300005.

The In.clear bromine/salt generator generates and releases bromine sanitizer into the spa water, rapidly destroying any microbiological contaminants such as waterborne bacteria, algae, and organic matter given off by spa bathers.

 This in.clear sanitizing system eliminates the need to add bromine or chlorine to your spa on a regular basis saving you trips to the store and shipping costs.

The in.clear system does not produce any offensive odors, it does not cause eye irritation and it's easy to use for the best choice for hot tub sanitation. 

In.Clear control box details

Includes:
1.5 PSI Pressure Switch
Communication Cable to Connect to Gecko Y and X Series ControlsAMP cord 2 wire, 4pin.